You've got your sticker, you're excited to apply it, but you don't know where to start? Don't worry! Here's our step-by-step guide to applying your StickerMaster stickers effortlessly and flawlessly:

✅ Requirements for Application:

• Microfiber cloth (or a soft cloth)

• Credit card or plastic spatula

• Patience and attention 😌

🪄 5-Step Guide to Applying Stickers

1. Clean the surface

Thoroughly clean the laptop surface where you will apply the sticker with an alcohol-based cleaner or a damp cloth. It's crucial that the surface is completely dry, dust-free, and grease-free .

2. Plan Your Accommodation in Advance

Before sticking the sticker, place it on the laptop to see how it will look. If you want to center and align it, you can make small pencil marks on the four edges (don't forget to erase them later).

3. Peel off the sticker

The sticker consists of three layers:

1. Transparent carrier layer on top.

2. Design sticker in the middle.

3. White protective paper underneath.

First, turn the sticker over and slowly remove the white paper underneath. The sticker should remain on the transparent carrier on top.

4. Apply Slowly

Align the sticker with the laptop surface and place it down.
Start from one edge and slowly apply the sticker, pressing out any air bubbles with a credit card or spatula.

5. Remove the Carrier

Once the sticker is fully adhered , slowly peel away the clear carrier from the corner . The design should now remain on the laptop surface.

Congratulations! The laptop is now completely yours! ✨

💡 Additional Tips:

• Don't rush during the application. Slow and careful application yields excellent results.

• If you're applying the sticker in cold weather, you can use a hair dryer to warm up the sticker and the surface a little.

• If an air bubble remains during application, you can make a very small hole with a needle and let it out.

📷 Share yours too!

Did you apply your sticker? Great! Share it with us on social media using the hashtag @bystickermaster , and we might feature your laptop on our page! 🚀